23 lines
No EOL
997 B
Markdown
23 lines
No EOL
997 B
Markdown
# Info
|
|
## Important Commands
|
|
Command to configure build options of the project:
|
|
`make menuconfig`
|
|
|
|
Command to flash the firmware:
|
|
`make flash`
|
|
|
|
Command to show the serial monitor:
|
|
`make monitor`
|
|
|
|
## Connection Error
|
|
If you encounter the error `[Errno 2]`, it likely means the microcontroller is not connected or the wrong tty port is selected.
|
|
To select the correct tty port, use the command `make menuconfig`, then navigate to **Serial Flasher Config -> Default Serial Port** and choose the correct port.
|
|
|
|
## Sensor Issues
|
|
If the sensor output is around **80°C**, there is likely a power connection issue.
|
|
If the output is around **-127°C**, the sensor's data wire is probably not connected.
|
|
|
|
## Compilation Errors
|
|
If the temperature input is `none`, it might be due to a compilation error caused by an incorrect SDK configuration.
|
|
Use the command `make menuconfig` and change the following settings:
|
|
**Component config -> newlib -> Disable nano formatting** |