add Info.md, api edit

embadet/Info.md

@@ -0,0 +1,4 @@
+# Info
+## sensor isshus
+## compiling errors
+when the temp input is non tr it mid be a compyling error caude by a falty sdk configuration

embadet/build/include/config/auto.conf

@@ -29,6 +29,7 @@ CONFIG_BOOTLOADER_APP_TEST_IN_OTA_1=
 CONFIG_BOOTLOADER_NUM_PIN_APP_TEST=
 CONFIG_BOOTLOADER_HOLD_TIME_GPIO=
 CONFIG_BOOTLOADER_STORE_OFFSET=0x0
+CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
 CONFIG_SECURE_BOOT_ENABLED=
 CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH=
 CONFIG_SECURE_BOOTLOADER_REFLASHABLE=
@@ -52,13 +53,13 @@ CONFIG_ESPTOOLPY_BAUD_2MB=
 CONFIG_ESPTOOLPY_BAUD_OTHER=
 CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
 CONFIG_ESPTOOLPY_BAUD=115200
-CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_COMPRESSED=
-CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=
 CONFIG_ESPTOOLPY_FLASHMODE_QOUT=
-CONFIG_ESPTOOLPY_FLASHMODE_DIO=
+CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
 CONFIG_ESPTOOLPY_FLASHMODE_DOUT=
 CONFIG_ESPTOOLPY_FLASHMODE="dio"
-CONFIG_SPI_FLASH_MODE=0x0
+CONFIG_SPI_FLASH_MODE=0x2
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=
 CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
 CONFIG_ESPTOOLPY_FLASHFREQ_26M=
@@ -100,7 +101,7 @@ CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE=
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=
-CONFIG_COMPILER_CXX_EXCEPTIONS=
+CONFIG_COMPILER_CXX_EXCEPTIONS=y
 CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 CONFIG_COMPILER_STACK_CHECK_MODE_NORM=
 CONFIG_COMPILER_STACK_CHECK_MODE_STRONG=
@@ -119,6 +120,8 @@ CONFIG_ESP_TLS_USING_MBEDTLS=y
 CONFIG_ESP_TLS_USING_WOLFSSL=
 CONFIG_ESP_TLS_SERVER=
 CONFIG_ESP_TLS_PSK_VERIFICATION=
+CONFIG_ESP_TLS_INSECURE=
+CONFIG_ESP_TLS_SKIP_SERVER_CERT_VERIFY=
 CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=
 CONFIG_ESP_DEBUG_WOLFSSL=
 CONFIG_ESP_WOLFSSL_INTERNAL=
@@ -470,6 +473,7 @@ CONFIG_MBEDTLS_SSL_PROTO_SSL3=
 CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
 CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
 CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
+CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1=
 CONFIG_MBEDTLS_SSL_PROTO_DTLS=
 CONFIG_MBEDTLS_SSL_ALPN=y
 CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
@@ -533,7 +537,7 @@ CONFIG_MQTT_CUSTOM_OUTBOX=
 CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
 CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF=
 CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR=
-CONFIG_NEWLIB_NANO_FORMAT=y
+CONFIG_NEWLIB_NANO_FORMAT=
 CONFIG_OPENSSL_DEBUG=
 CONFIG_OPENSSL_DEBUG_LEVEL=
 CONFIG_OPENSSL_LOWLEVEL_DEBUG=
@@ -546,6 +550,7 @@ CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
 CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
 CONFIG_PTHREAD_STACK_MIN=768
 CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
+CONFIG_ENABLE_TH25Q16HB_PATCH_0=
 CONFIG_SPIFFS_MAX_PARTITIONS=3
 CONFIG_SPIFFS_CACHE=y
 CONFIG_SPIFFS_CACHE_WR=y
@@ -592,9 +597,9 @@ CONFIG_WPA_SCAN_CACHE=
 CONFIG_TARGET_PLATFORM="esp8266"
 CONFIG_TOOLPREFIX="xtensa-lx106-elf-"
 CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=
-CONFIG_FLASHMODE_QIO=y
+CONFIG_FLASHMODE_QIO=
 CONFIG_FLASHMODE_QOUT=
-CONFIG_FLASHMODE_DIO=
+CONFIG_FLASHMODE_DIO=y
 CONFIG_FLASHMODE_DOUT=
 CONFIG_MONITOR_BAUD_9600B=
 CONFIG_MONITOR_BAUD_57600B=
@@ -611,7 +616,7 @@ CONFIG_OPTIMIZATION_LEVEL_RELEASE=
 CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
 CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=
 CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=
-CONFIG_CXX_EXCEPTIONS=
+CONFIG_CXX_EXCEPTIONS=y
 CONFIG_STACK_CHECK_NONE=y
 CONFIG_STACK_CHECK_NORM=
 CONFIG_STACK_CHECK_STRONG=

embadet/build/include/sdkconfig.h

@@ -11,14 +11,14 @@
 #define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
 #define CONFIG_LOG_BOOTLOADER_LEVEL 3
 #define CONFIG_BOOTLOADER_STORE_OFFSET 0x0
+#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1
 #define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
 #define CONFIG_ESPTOOLPY_BAUD_115200B 1
 #define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
 #define CONFIG_ESPTOOLPY_BAUD 115200
-#define CONFIG_ESPTOOLPY_COMPRESSED 1
+#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1
-#define CONFIG_ESPTOOLPY_FLASHMODE_QIO 1
 #define CONFIG_ESPTOOLPY_FLASHMODE "dio"
-#define CONFIG_SPI_FLASH_MODE 0x0
+#define CONFIG_SPI_FLASH_MODE 0x2
 #define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
 #define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
 #define CONFIG_SPI_FLASH_FREQ 0x0
@@ -38,6 +38,7 @@
 #define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
 #define CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG 1
 #define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1
+#define CONFIG_COMPILER_CXX_EXCEPTIONS 1
 #define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1
 #define CONFIG_APP_UPDATE_CHECK_APP_SUM 1
 #define CONFIG_APP_COMPILE_TIME_DATE 1
@@ -219,7 +220,6 @@
 #define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1
 #define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1
 #define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1
-#define CONFIG_NEWLIB_NANO_FORMAT 1
 #define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
 #define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5
 #define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072

embadet/main/apple.c

@@ -8,7 +8,14 @@
 #include <esp_wifi.h>
 
 struct appldata;
-
+/*
+struct appldata{
+    uint8_t mac[6];
+    float temp;
+    float battaryVoltage;
+    unsigned long upTime;
+}
+*/
 int app_main() {
 
 
@@ -25,6 +32,7 @@ int app_main() {
 
 
 
+
     // Create variable for handler
     ds18b20_handler_t sensor;
     // Check for any initialization failures
@@ -57,11 +65,3 @@ int app_main() {
     return 0;
 }
 
-/*
-struct appldata{
-    uint8_t uuid;
-    signed float temp;
-    unsigned float battaryVoltage;
-    unsigned long upTime;
-}
-*/