From 97dfb13b74d19f9afb959841e4baea9200ff78d4 Mon Sep 17 00:00:00 2001 From: user Date: Fri, 11 Oct 2024 18:01:48 +0200 Subject: [PATCH] working temp sensor --- embadet/components/README.md | 31 ++ embadet/components/ds18b20/component.mk | 18 +- embadet/components/ds18b20/ds18b20.c | 296 ++++-------- embadet/components/ds18b20/ds18b20.h | 234 ++++----- embadet/components/onewire/LICENSE | 31 -- embadet/components/onewire/README.md | 14 - embadet/components/onewire/component.mk | 13 +- embadet/components/onewire/onewire.c | 602 +++++++----------------- embadet/components/onewire/onewire.h | 316 ++++--------- embadet/main/apple.c | 64 +-- 10 files changed, 503 insertions(+), 1116 deletions(-) create mode 100644 embadet/components/README.md mode change 100644 => 100755 embadet/components/ds18b20/component.mk mode change 100644 => 100755 embadet/components/ds18b20/ds18b20.c mode change 100644 => 100755 embadet/components/ds18b20/ds18b20.h delete mode 100644 embadet/components/onewire/LICENSE delete mode 100644 embadet/components/onewire/README.md mode change 100644 => 100755 embadet/components/onewire/component.mk mode change 100644 => 100755 embadet/components/onewire/onewire.c mode change 100644 => 100755 embadet/components/onewire/onewire.h diff --git a/embadet/components/README.md b/embadet/components/README.md new file mode 100644 index 0000000..1af318f --- /dev/null +++ b/embadet/components/README.md @@ -0,0 +1,31 @@ +# DS18B20 Component +Simple DS18B20 temperature sensor library for [ESP8266 RTOS SDK](https://github.com/espressif/ESP8266_RTOS_SDK) for reading Celsius temperature with different resolutions from singular device. + +## Usage +``` +// Create variable for handler +ds18b20_handler_t sensor; + +// Check for any initialization failures +if (!ds18b20_init(&sensor, GPIO_NUM_12, TEMP_RES_12_BIT)) +{ + ESP_LOGE("TAG", "Failed to initalize DS18B20!"); + + return 0; // Exit +} + +float temp = 0; + +// Initalize conversion +ds18b20_convert_temp(&sensor); + +// If you doesn't convert temperature you may read 85.0 Celsius, +// as it is default temperature set by DS18B20 if convert command wasn't issued. +temp = ds18b20_read_temp(&sensor); // Read temperature + +// Print temperature with 4 decimal places +// (12 bit resolution measurement accuracy is 0.0625 Celsius) +ESP_LOGI("TAG", "Temperature = %.4f", temp); +``` + +> **_NOTE:_** If last statement doesn't print temperature you may have to disable Newlib nano in `menuconfig` of RTOS SDK. \ No newline at end of file diff --git a/embadet/components/ds18b20/component.mk b/embadet/components/ds18b20/component.mk old mode 100644 new mode 100755 index 2bffda5..f941c9f --- a/embadet/components/ds18b20/component.mk +++ b/embadet/components/ds18b20/component.mk @@ -1,15 +1,5 @@ -# Component makefile for extras/ds18b20 +# +# Component Makefile +# -# expected anyone using bmp driver includes it as 'ds18b20/ds18b20.h' -INC_DIRS += $(ds18b20_ROOT).. - -# args for passing into compile rule generation -ds18b20_SRC_DIR = $(ds18b20_ROOT) - -# users can override this setting and get console debug output -DS18B20_DEBUG ?= 0 -ifeq ($(DS18B20_DEBUG),1) - ds18b20_CFLAGS = $(CFLAGS) -DDS18B20_DEBUG -endif - -$(eval $(call component_compile_rules,ds18b20)) +COMPONENT_ADD_INCLUDEDIRS := . \ No newline at end of file diff --git a/embadet/components/ds18b20/ds18b20.c b/embadet/components/ds18b20/ds18b20.c old mode 100644 new mode 100755 index 0779a70..9ae31eb --- a/embadet/components/ds18b20/ds18b20.c +++ b/embadet/components/ds18b20/ds18b20.c @@ -1,244 +1,120 @@ -#include "FreeRTOS.h" -#include "task.h" -#include "math.h" - - #include "ds18b20.h" +#include "freertos/FreeRTOS.h" +#include "freertos/task.h" +#include "esp_log.h" -#define DS18B20_WRITE_SCRATCHPAD 0x4E -#define DS18B20_READ_SCRATCHPAD 0xBE -#define DS18B20_COPY_SCRATCHPAD 0x48 -#define DS18B20_READ_EEPROM 0xB8 -#define DS18B20_READ_PWRSUPPLY 0xB4 -#define DS18B20_SEARCHROM 0xF0 -#define DS18B20_SKIP_ROM 0xCC -#define DS18B20_READROM 0x33 -#define DS18B20_MATCHROM 0x55 -#define DS18B20_ALARMSEARCH 0xEC -#define DS18B20_CONVERT_T 0x44 +static const char* TAG_DS18B20 = "DS18B20"; +static const uint16_t ds18b20_temp_conv_time[] = {94, 188, 375, 750}; // ms +static const uint16_t ds18b20_resolution_val[] = {0x1F, 0x3F, 0x5F, 0x7F}; -#define os_sleep_ms(x) vTaskDelay(((x) + portTICK_PERIOD_MS - 1) / portTICK_PERIOD_MS) +uint8_t ds18b20_init(ds18b20_handler_t *device, gpio_num_t pin, ds18b20_temp_res_t resolution) +{ + if (!device) + { + ESP_LOGW(TAG_DS18B20, "device is null!"); -#define DS18B20_FAMILY_ID 0x28 -#define DS18S20_FAMILY_ID 0x10 - -#ifdef DS18B20_DEBUG -#define debug(fmt, ...) printf("%s" fmt "\n", "DS18B20: ", ## __VA_ARGS__); -#else -#define debug(fmt, ...) -#endif - -uint8_t ds18b20_read_all(uint8_t pin, ds_sensor_t *result) { - onewire_addr_t addr; - onewire_search_t search; - uint8_t sensor_id = 0; - - onewire_search_start(&search); - - while ((addr = onewire_search_next(&search, pin)) != ONEWIRE_NONE) { - uint8_t crc = onewire_crc8((uint8_t *)&addr, 7); - if (crc != (addr >> 56)){ - debug("CRC check failed: %02X %02X\n", (unsigned)(addr >> 56), crc); - return 0; - } - - onewire_reset(pin); - onewire_select(pin, addr); - onewire_write(pin, DS18B20_CONVERT_T); - - onewire_power(pin); - vTaskDelay(750 / portTICK_PERIOD_MS); - - onewire_reset(pin); - onewire_select(pin, addr); - onewire_write(pin, DS18B20_READ_SCRATCHPAD); - - uint8_t get[10]; - - for (int k=0;k<9;k++){ - get[k]=onewire_read(pin); - } - - //debug("\n ScratchPAD DATA = %X %X %X %X %X %X %X %X %X\n",get[8],get[7],get[6],get[5],get[4],get[3],get[2],get[1],get[0]); - crc = onewire_crc8(get, 8); - - if (crc != get[8]){ - debug("CRC check failed: %02X %02X\n", get[8], crc); - return 0; - } - - uint8_t temp_msb = get[1]; // Sign byte + lsbit - uint8_t temp_lsb = get[0]; // Temp data plus lsb - uint16_t temp = temp_msb << 8 | temp_lsb; - - float temperature; - - temperature = (temp * 625.0)/10000; - //debug("Got a DS18B20 Reading: %d.%02d\n", (int)temperature, (int)(temperature - (int)temperature) * 100); - result[sensor_id].id = sensor_id; - result[sensor_id].value = temperature; - sensor_id++; - } - return sensor_id; -} - -float ds18b20_read_single(uint8_t pin) { - - onewire_reset(pin); - onewire_skip_rom(pin); - onewire_write(pin, DS18B20_CONVERT_T); - - onewire_power(pin); - vTaskDelay(750 / portTICK_PERIOD_MS); - - onewire_reset(pin); - onewire_skip_rom(pin); - onewire_write(pin, DS18B20_READ_SCRATCHPAD); - - uint8_t get[10]; - - for (int k=0;k<9;k++){ - get[k]=onewire_read(pin); - } - - //debug("\n ScratchPAD DATA = %X %X %X %X %X %X %X %X %X\n",get[8],get[7],get[6],get[5],get[4],get[3],get[2],get[1],get[0]); - uint8_t crc = onewire_crc8(get, 8); - - if (crc != get[8]){ - debug("CRC check failed: %02X %02X", get[8], crc); return 0; } - uint8_t temp_msb = get[1]; // Sign byte + lsbit - uint8_t temp_lsb = get[0]; // Temp data plus lsb + if (!onewire_init(&device->bus, pin, NULL)) + { + ESP_LOGW(TAG_DS18B20, "Failed to initialize onewire bus"); - uint16_t temp = temp_msb << 8 | temp_lsb; + return 0; + } - float temperature; + device->res = resolution; - temperature = (temp * 625.0)/10000; - return temperature; - //debug("Got a DS18B20 Reading: %d.%02d\n", (int)temperature, (int)(temperature - (int)temperature) * 100); + // Configure resolution + ds18b20_write_scratchpad(device); + ds18b20_read_scratchpad(device); + + return 1; } -bool ds18b20_measure(int pin, ds18b20_addr_t addr, bool wait) { - if (!onewire_reset(pin)) { - return false; - } - if (addr == DS18B20_ANY) { - onewire_skip_rom(pin); - } else { - onewire_select(pin, addr); - } - taskENTER_CRITICAL(); - onewire_write(pin, DS18B20_CONVERT_T); - // For parasitic devices, power must be applied within 10us after issuing - // the convert command. - onewire_power(pin); - taskEXIT_CRITICAL(); +void ds18b20_send_command(ds18b20_handler_t *device, ds18b20_commands_t command) +{ + uint8_t payload = 0x0 ^ command; - if (wait) { - os_sleep_ms(750); - onewire_depower(pin); - } - - return true; + onewire_write_byte(&device->bus, payload); } -bool ds18b20_read_scratchpad(int pin, ds18b20_addr_t addr, uint8_t *buffer) { - uint8_t crc; - uint8_t expected_crc; +void ds18b20_convert_temp(ds18b20_handler_t *device) +{ + onewire_reset(&device->bus); + onewire_send_command(&device->bus, _ROM_SKIP); - if (!onewire_reset(pin)) { - return false; - } - if (addr == DS18B20_ANY) { - onewire_skip_rom(pin); - } else { - onewire_select(pin, addr); - } - onewire_write(pin, DS18B20_READ_SCRATCHPAD); + ds18b20_send_command(device, _CONVERT_T); - for (int i = 0; i < 8; i++) { - buffer[i] = onewire_read(pin); - } - crc = onewire_read(pin); - - expected_crc = onewire_crc8(buffer, 8); - if (crc != expected_crc) { - debug("CRC check failed reading scratchpad: %02x %02x %02x %02x %02x %02x %02x %02x : %02x (expected %02x)\n", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5], buffer[6], buffer[7], crc, expected_crc); - return false; - } - - return true; + vTaskDelay(pdMS_TO_TICKS(ds18b20_temp_conv_time[device->res])); } -float ds18b20_read_temperature(int pin, ds18b20_addr_t addr) { - uint8_t scratchpad[8]; - int16_t temp; +void ds18b20_write_scratchpad(ds18b20_handler_t *device) +{ + onewire_reset(&device->bus); + onewire_send_command(&device->bus, _ROM_SKIP); - if (!ds18b20_read_scratchpad(pin, addr, scratchpad)) { - return NAN; - } + ds18b20_send_command(device, _SCRATCH_WRITE); - temp = scratchpad[1] << 8 | scratchpad[0]; - - float res; - if ((uint8_t)addr == DS18B20_FAMILY_ID) { - res = ((float)temp * 625.0)/10000; - } - else { - temp = ((temp & 0xfffe) << 3) + (16 - scratchpad[6]) - 4; - res = ((float)temp * 625.0)/10000 - 0.25; - } - return res; + // Th and Tl registers + onewire_write_byte(&device->bus, 0); + onewire_write_byte(&device->bus, 0); + // Resolution value + onewire_write_byte(&device->bus, ds18b20_resolution_val[device->res]); } -float ds18b20_measure_and_read(int pin, ds18b20_addr_t addr) { - if (!ds18b20_measure(pin, addr, true)) { - return NAN; - } - return ds18b20_read_temperature(pin, addr); +void ds18b20_copy_scratchpad(ds18b20_handler_t *device) +{ + onewire_reset(&device->bus); + onewire_send_command(&device->bus, _ROM_SKIP); + + ds18b20_send_command(device, _SCRATCH_COPY); } -bool ds18b20_measure_and_read_multi(int pin, ds18b20_addr_t *addr_list, int addr_count, float *result_list) { - if (!ds18b20_measure(pin, DS18B20_ANY, true)) { - for (int i=0; i < addr_count; i++) { - result_list[i] = NAN; - } - return false; +void ds18b20_read_scratchpad(ds18b20_handler_t *device) +{ + onewire_reset(&device->bus); + onewire_send_command(&device->bus, _ROM_SKIP); + + ds18b20_send_command(device, _SCRATCH_READ); + + uint8_t i; + for (i = 0; i < 9; i++) + { + device->scratchpad[i] = onewire_read_byte(&device->bus); } - return ds18b20_read_temp_multi(pin, addr_list, addr_count, result_list); } -int ds18b20_scan_devices(int pin, ds18b20_addr_t *addr_list, int addr_count) { - onewire_search_t search; - onewire_addr_t addr; - int found = 0; - - onewire_search_start(&search); - while ((addr = onewire_search_next(&search, pin)) != ONEWIRE_NONE) { - uint8_t family_id = (uint8_t)addr; - if (family_id == DS18B20_FAMILY_ID || family_id == DS18S20_FAMILY_ID) { - if (found < addr_count) { - addr_list[found] = addr; - } - found++; - } +void ds18b20_print_scratchpad(ds18b20_handler_t *device) +{ + uint8_t i; + for (i = 0; i < 9; i++) + { + printf("%x ", device->scratchpad[i]); } - return found; + + printf("\n"); } -bool ds18b20_read_temp_multi(int pin, ds18b20_addr_t *addr_list, int addr_count, float *result_list) { - bool result = true; +float ds18b20_read_temp(ds18b20_handler_t *device) +{ + ds18b20_read_scratchpad(device); - for (int i = 0; i < addr_count; i++) { - result_list[i] = ds18b20_read_temperature(pin, addr_list[i]); - if (isnan(result_list[i])) { - result = false; - } + uint8_t sign = 0x0; + uint8_t lsb = device->scratchpad[0]; + uint8_t mask = 0xFF << (TEMP_RES_12_BIT - device->res); + lsb &= mask; // Mask out last 3 bits accordingly + uint8_t msb = device->scratchpad[1]; + + sign = msb & 0x80; + int16_t temp = 0x0; + + temp = lsb + (msb << 8); + + if (sign) + { + temp = ~(-temp) + 1; // Convert signed two complement's } - return result; -} - + return temp / 16.0; +} \ No newline at end of file diff --git a/embadet/components/ds18b20/ds18b20.h b/embadet/components/ds18b20/ds18b20.h old mode 100644 new mode 100755 index afd4d14..fa21886 --- a/embadet/components/ds18b20/ds18b20.h +++ b/embadet/components/ds18b20/ds18b20.h @@ -1,157 +1,97 @@ -#ifndef DRIVER_DS18B20_H_ -#define DRIVER_DS18B20_H_ -#include +#ifndef DS18B20_H +#define DS18B20_H -#ifdef __cplusplus -extern "C" { -#endif +#include "onewire.h" -/** @file ds18b20.h - * - * Communicate with the DS18B20 family of one-wire temperature sensor ICs. - * - */ +typedef enum { + TEMP_RES_9_BIT = 0, + TEMP_RES_10_BIT = 1, + TEMP_RES_11_BIT = 2, + TEMP_RES_12_BIT = 3 +} ds18b20_temp_res_t; -typedef onewire_addr_t ds18b20_addr_t; +typedef enum { + _SCRATCH_WRITE = 0x4E, + _SCRATCH_READ = 0xBE, + _SCRATCH_COPY = 0x48, + _CONVERT_T = 0x44 +} ds18b20_commands_t; -/** An address value which can be used to indicate "any device on the bus" */ -#define DS18B20_ANY ONEWIRE_NONE - -/** Find the addresses of all DS18B20 devices on the bus. - * - * Scans the bus for all devices and places their addresses in the supplied - * array. If there are more than `addr_count` devices on the bus, only the - * first `addr_count` are recorded. - * - * @param pin The GPIO pin connected to the DS18B20 bus - * @param addr_list A pointer to an array of ds18b20_addr_t values. This - * will be populated with the addresses of the found - * devices. - * @param addr_count Number of slots in the `addr_list` array. At most this - * many addresses will be returned. - * - * @returns The number of devices found. Note that this may be less than, - * equal to, or more than `addr_count`, depending on how many DS18B20 devices - * are attached to the bus. - */ -int ds18b20_scan_devices(int pin, ds18b20_addr_t *addr_list, int addr_count); - -/** Tell one or more sensors to perform a temperature measurement and - * conversion (CONVERT_T) operation. This operation can take up to 750ms to - * complete. - * - * If `wait=true`, this routine will automatically drive the pin high for the - * necessary 750ms after issuing the command to ensure parasitically-powered - * devices have enough power to perform the conversion operation (for - * non-parasitically-powered devices, this is not necessary but does not - * hurt). If `wait=false`, this routine will drive the pin high, but will - * then return immediately. It is up to the caller to wait the requisite time - * and then depower the bus using onewire_depower() or by issuing another - * command once conversion is done. - * - * @param pin The GPIO pin connected to the DS18B20 device - * @param addr The 64-bit address of the device on the bus. This can be set - * to ::DS18B20_ANY to send the command to all devices on the bus - * at the same time. - * @param wait Whether to wait for the necessary 750ms for the DS18B20 to - * finish performing the conversion before returning to the - * caller (You will normally want to do this). - * - * @returns `true` if the command was successfully issued, or `false` on error. - */ -bool ds18b20_measure(int pin, ds18b20_addr_t addr, bool wait); - -/** Read the value from the last CONVERT_T operation. - * - * This should be called after ds18b20_measure() to fetch the result of the - * temperature measurement. - * - * @param pin The GPIO pin connected to the DS18B20 device - * @param addr The 64-bit address of the device to read. This can be set - * to ::DS18B20_ANY to read any device on the bus (but note - * that this will only work if there is exactly one device - * connected, or they will corrupt each others' transmissions) - * - * @returns The temperature in degrees Celsius, or NaN if there was an error. - */ -float ds18b20_read_temperature(int pin, ds18b20_addr_t addr); - -/** Read the value from the last CONVERT_T operation for multiple devices. - * - * This should be called after ds18b20_measure() to fetch the result of the - * temperature measurement. - * - * @param pin The GPIO pin connected to the DS18B20 bus - * @param addr_list A list of addresses for devices to read. - * @param addr_count The number of entries in `addr_list`. - * @param result_list An array of floats to hold the returned temperature - * values. It should have at least `addr_count` entries. - * - * @returns `true` if all temperatures were fetched successfully, or `false` - * if one or more had errors (the temperature for erroring devices will be - * returned as NaN). - */ -bool ds18b20_read_temp_multi(int pin, ds18b20_addr_t *addr_list, int addr_count, float *result_list); - -/** Perform a ds18b20_measure() followed by ds18b20_read_temperature() - * - * @param pin The GPIO pin connected to the DS18B20 device - * @param addr The 64-bit address of the device to read. This can be set - * to ::DS18B20_ANY to read any device on the bus (but note - * that this will only work if there is exactly one device - * connected, or they will corrupt each others' transmissions) - * - * @returns The temperature in degrees Celsius, or NaN if there was an error. - */ -float ds18b20_measure_and_read(int pin, ds18b20_addr_t addr); - -/** Perform a ds18b20_measure() followed by ds18b20_read_temp_multi() - * - * @param pin The GPIO pin connected to the DS18B20 bus - * @param addr_list A list of addresses for devices to read. - * @param addr_count The number of entries in `addr_list`. - * @param result_list An array of floats to hold the returned temperature - * values. It should have at least `addr_count` entries. - * - * @returns `true` if all temperatures were fetched successfully, or `false` - * if one or more had errors (the temperature for erroring devices will be - * returned as NaN). - */ -bool ds18b20_measure_and_read_multi(int pin, ds18b20_addr_t *addr_list, int addr_count, float *result_list); - -/** Read the scratchpad data for a particular DS18B20 device. - * - * This is not generally necessary to do directly. It is done automatically - * as part of ds18b20_read_temperature(). - * - * @param pin The GPIO pin connected to the DS18B20 device - * @param addr The 64-bit address of the device to read. This can be set - * to ::DS18B20_ANY to read any device on the bus (but note - * that this will only work if there is exactly one device - * connected, or they will corrupt each others' transmissions) - * @param buffer An 8-byte buffer to hold the read data. - * - * @returns `true` if the data was read successfully, or `false` on error. - */ -bool ds18b20_read_scratchpad(int pin, ds18b20_addr_t addr, uint8_t *buffer); - -// The following are obsolete/deprecated APIs +typedef uint8_t ds18b20_scratchpad_t[9]; typedef struct { - uint8_t id; - float value; -} ds_sensor_t; + onewire_bus_handle_t bus; + ds18b20_temp_res_t res; + ds18b20_scratchpad_t scratchpad; +} ds18b20_handler_t; -// Scan all ds18b20 sensors on bus and return its amount. -// Result are saved in array of ds_sensor_t structure. -uint8_t ds18b20_read_all(uint8_t pin, ds_sensor_t *result); +/** + * @brief Initialize DS18B20 + * + * @param device DS18B20 handler + * @param pin Data pin + * @param resolution Temperature resolution + * + * @retval 1: Success + * @retval 0: Incorrect pin or gpio configuration failed (Logs tells which happened) + */ +uint8_t ds18b20_init(ds18b20_handler_t *device, gpio_num_t pin, ds18b20_temp_res_t resolution); -// This method is just to demonstrate how to read -// temperature from single dallas chip. -float ds18b20_read_single(uint8_t pin); +/** + * @brief Send command to DS18B20 + * + * @param device DS18B20 handler + * @param command Function command + */ +void ds18b20_send_command(ds18b20_handler_t *device, ds18b20_commands_t command); -#ifdef __cplusplus -} -#endif +/** + * @brief Write to scratchpad + * + * @param device DS18B20 handler + */ +void ds18b20_write_scratchpad(ds18b20_handler_t *device); -#endif /* DRIVER_DS18B20_H_ */ +/** + * @brief Read from scratchpad + * + * @param device DS18B20 handler + */ +void ds18b20_read_scratchpad(ds18b20_handler_t *device); + +/** + * @brief Copy to scratchpad + * + * @param device DS18B20 handler + */ +void ds18b20_copy_scratchpad(ds18b20_handler_t *device); + +/** + * @brief Print scratchpad bytes + * + * @param device DS18B20 handler + */ +void ds18b20_print_scratchpad(ds18b20_handler_t *device); + +/** + * @brief Initialize temperature conversion and wait for conversion + * + * Function sends CONV_T command and waits for X ms according to `ds18b20_temp_conv_time` static array + * + * @warning Should be called before `ds18b20_convert_temp()` function + * + * @param device DS18B20 handler + */ +void ds18b20_convert_temp(ds18b20_handler_t *device); + +/** + * @brief Read temperature from scratchpad + * + * Function reads temperature from scratchpad and converts it to Celsius. + * @warning `ds18b20_convert_temp()` have to be called before for updated temperature. + * + * @param device DS18B20 handler + */ +float ds18b20_read_temp(ds18b20_handler_t *device); + +#endif \ No newline at end of file diff --git a/embadet/components/onewire/LICENSE b/embadet/components/onewire/LICENSE deleted file mode 100644 index c5a152a..0000000 --- a/embadet/components/onewire/LICENSE +++ /dev/null @@ -1,31 +0,0 @@ -The MIT License (MIT) - -Copyright (c) 2014 zeroday nodemcu.com - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. - -------------------------------------------------------------------------------- - -Portions copyright (C) 2000 Dallas Semiconductor Corporation, under the -following additional terms: - -Except as contained in this notice, the name of Dallas Semiconductor -shall not be used except as stated in the Dallas Semiconductor -Branding Policy. - diff --git a/embadet/components/onewire/README.md b/embadet/components/onewire/README.md deleted file mode 100644 index e490b9a..0000000 --- a/embadet/components/onewire/README.md +++ /dev/null @@ -1,14 +0,0 @@ -# Yet another one wire driver for the ESP8266 - -This is a port of a bit-banging one wire driver based on the implementation -from NodeMCU. - -This, in turn, appears to have been based on the PJRC Teensy driver -(https://www.pjrc.com/teensy/td_libs_OneWire.html), by Jim Studt, Paul -Stoffregen, and a host of others. - -The original code is licensed under the MIT license. The CRC code was taken -(at least partially) from Dallas Semiconductor sample code, which was licensed -under an MIT license with an additional clause (prohibiting inappropriate use -of the Dallas Semiconductor name). See the accompanying LICENSE file for -details. diff --git a/embadet/components/onewire/component.mk b/embadet/components/onewire/component.mk old mode 100644 new mode 100755 index c453b58..f941c9f --- a/embadet/components/onewire/component.mk +++ b/embadet/components/onewire/component.mk @@ -1,10 +1,5 @@ -# Component makefile for extras/onewire +# +# Component Makefile +# -# expected anyone using onewire driver includes it as 'onewire/onewire.h' -INC_DIRS += $(onewire_ROOT).. - -# args for passing into compile rule generation -onewire_INC_DIR = -onewire_SRC_DIR = $(onewire_ROOT) - -$(eval $(call component_compile_rules,onewire)) +COMPONENT_ADD_INCLUDEDIRS := . \ No newline at end of file diff --git a/embadet/components/onewire/onewire.c b/embadet/components/onewire/onewire.c old mode 100644 new mode 100755 index 5111271..9ebc03f --- a/embadet/components/onewire/onewire.c +++ b/embadet/components/onewire/onewire.c @@ -1,453 +1,175 @@ +#include "freertos/FreeRTOS.h" +#include "freertos/task.h" +#include "esp_log.h" +#include "rom/ets_sys.h" #include "onewire.h" -#include "string.h" -#include "task.h" -#include "esp/gpio.h" -#define ONEWIRE_SELECT_ROM 0x55 -#define ONEWIRE_SKIP_ROM 0xcc -#define ONEWIRE_SEARCH 0xf0 +uint8_t onewire_configure_gpio(gpio_num_t pin, gpio_config_t *custom_config) +{ + if (!GPIO_IS_VALID_GPIO(pin)) + { + ESP_LOGE(TAG_ONEWIRE, "Provided pin is incorrect!"); -// Waits up to `max_wait` microseconds for the specified pin to go high. -// Returns true if successful, false if the bus never comes high (likely -// shorted). -static inline bool _onewire_wait_for_bus(int pin, int max_wait) { - bool state; - for (int i = 0; i < ((max_wait + 4) / 5); i++) { - if (gpio_read(pin)) break; - sdk_os_delay_us(5); - } - state = gpio_read(pin); - // Wait an extra 1us to make sure the devices have an adequate recovery - // time before we drive things low again. - sdk_os_delay_us(1); - return state; -} - -// Perform the onewire reset function. We will wait up to 250uS for -// the bus to come high, if it doesn't then it is broken or shorted -// and we return false; -// -// Returns true if a device asserted a presence pulse, false otherwise. -// -bool onewire_reset(int pin) { - bool r; - - gpio_enable(pin, GPIO_OUT_OPEN_DRAIN); - gpio_write(pin, 1); - // wait until the wire is high... just in case - if (!_onewire_wait_for_bus(pin, 250)) return false; - - gpio_write(pin, 0); - sdk_os_delay_us(480); - - taskENTER_CRITICAL(); - gpio_write(pin, 1); // allow it to float - sdk_os_delay_us(70); - r = !gpio_read(pin); - taskEXIT_CRITICAL(); - - // Wait for all devices to finish pulling the bus low before returning - if (!_onewire_wait_for_bus(pin, 410)) return false; - - return r; -} - -static bool _onewire_write_bit(int pin, bool v) { - if (!_onewire_wait_for_bus(pin, 10)) return false; - if (v) { - taskENTER_CRITICAL(); - gpio_write(pin, 0); // drive output low - sdk_os_delay_us(10); - gpio_write(pin, 1); // allow output high - taskEXIT_CRITICAL(); - sdk_os_delay_us(55); - } else { - taskENTER_CRITICAL(); - gpio_write(pin, 0); // drive output low - sdk_os_delay_us(65); - gpio_write(pin, 1); // allow output high - taskEXIT_CRITICAL(); - } - sdk_os_delay_us(1); - - return true; -} - -static int _onewire_read_bit(int pin) { - int r; - - if (!_onewire_wait_for_bus(pin, 10)) return -1; - taskENTER_CRITICAL(); - gpio_write(pin, 0); - sdk_os_delay_us(2); - gpio_write(pin, 1); // let pin float, pull up will raise - sdk_os_delay_us(11); - r = gpio_read(pin); // Must sample within 15us of start - taskEXIT_CRITICAL(); - sdk_os_delay_us(48); - - return r; -} - -// Write a byte. The writing code uses open-drain mode and expects the pullup -// resistor to pull the line high when not driven low. If you need strong -// power after the write (e.g. DS18B20 in parasite power mode) then call -// onewire_power() after this is complete to actively drive the line high. -// -bool onewire_write(int pin, uint8_t v) { - uint8_t bitMask; - - for (bitMask = 0x01; bitMask; bitMask <<= 1) { - if (!_onewire_write_bit(pin, (bitMask & v))) { - return false; - } - } - return true; -} - -bool onewire_write_bytes(int pin, const uint8_t *buf, size_t count) { - size_t i; - - for (i = 0; i < count; i++) { - if (!onewire_write(pin, buf[i])) { - return false; - } - } - return true; -} - -// Read a byte -// -int onewire_read(int pin) { - uint8_t bitMask; - int r = 0; - int bit; - - for (bitMask = 0x01; bitMask; bitMask <<= 1) { - bit = _onewire_read_bit(pin); - if (bit < 0) { - return -1; - } else if (bit) { - r |= bitMask; - } - } - return r; -} - -bool onewire_read_bytes(int pin, uint8_t *buf, size_t count) { - size_t i; - int b; - - for (i = 0; i < count; i++) { - b = onewire_read(pin); - if (b < 0) return false; - buf[i] = b; - } - return true; -} - -bool onewire_select(int pin, onewire_addr_t addr) { - uint8_t i; - - if (!onewire_write(pin, ONEWIRE_SELECT_ROM)) { - return false; + return 0; } - for (i = 0; i < 8; i++) { - if (!onewire_write(pin, addr & 0xff)) { - return false; - } - addr >>= 8; + gpio_config_t config = {}; + + if (!custom_config) + { + config.intr_type = GPIO_INTR_DISABLE; + config.mode = GPIO_MODE_OUTPUT_OD; + config.pin_bit_mask = ((uint32_t) 1 << pin); + config.pull_down_en = 0; + config.pull_up_en = 0; + } + else + { + config = *custom_config; } - return true; -} - -bool onewire_skip_rom(int pin) { - return onewire_write(pin, ONEWIRE_SKIP_ROM); -} - -bool onewire_power(int pin) { - // Make sure the bus is not being held low before driving it high, or we - // may end up shorting ourselves out. - if (!_onewire_wait_for_bus(pin, 10)) return false; - - gpio_enable(pin, GPIO_OUTPUT); - gpio_write(pin, 1); - - return true; -} - -void onewire_depower(int pin) { - gpio_enable(pin, GPIO_OUT_OPEN_DRAIN); -} - -void onewire_search_start(onewire_search_t *search) { - // reset the search state - memset(search, 0, sizeof(*search)); -} - -void onewire_search_prefix(onewire_search_t *search, uint8_t family_code) { - uint8_t i; - - search->rom_no[0] = family_code; - for (i = 1; i < 8; i++) { - search->rom_no[i] = 0; + if (gpio_config(&config) != ESP_OK) + { + return 0; } - search->last_discrepancy = 64; - search->last_device_found = false; -} - -// Perform a search. If the next device has been successfully enumerated, its -// ROM address will be returned. If there are no devices, no further -// devices, or something horrible happens in the middle of the -// enumeration then ONEWIRE_NONE is returned. Use OneWire::reset_search() to -// start over. -// -// --- Replaced by the one from the Dallas Semiconductor web site --- -//-------------------------------------------------------------------------- -// Perform the 1-Wire Search Algorithm on the 1-Wire bus using the existing -// search state. -// Return 1 : device found, ROM number in ROM_NO buffer -// 0 : device not found, end of search -// -onewire_addr_t onewire_search_next(onewire_search_t *search, int pin) { - //TODO: add more checking for read/write errors - uint8_t id_bit_number; - uint8_t last_zero, search_result; - int rom_byte_number; - int8_t id_bit, cmp_id_bit; - onewire_addr_t addr; - unsigned char rom_byte_mask; - bool search_direction; - - // initialize for search - id_bit_number = 1; - last_zero = 0; - rom_byte_number = 0; - rom_byte_mask = 1; - search_result = 0; - - // if the last call was not the last one - if (!search->last_device_found) { - // 1-Wire reset - if (!onewire_reset(pin)) { - // reset the search - search->last_discrepancy = 0; - search->last_device_found = false; - return ONEWIRE_NONE; - } - - // issue the search command - onewire_write(pin, ONEWIRE_SEARCH); - - // loop to do the search - do { - // read a bit and its complement - id_bit = _onewire_read_bit(pin); - cmp_id_bit = _onewire_read_bit(pin); - - // check for no devices on 1-wire - if ((id_bit < 0) || (cmp_id_bit < 0)) { - // Read error - break; - } else if ((id_bit == 1) && (cmp_id_bit == 1)) { - break; - } else { - // all devices coupled have 0 or 1 - if (id_bit != cmp_id_bit) { - search_direction = id_bit; // bit write value for search - } else { - // if this discrepancy if before the Last Discrepancy - // on a previous next then pick the same as last time - if (id_bit_number < search->last_discrepancy) { - search_direction = ((search->rom_no[rom_byte_number] & rom_byte_mask) > 0); - } else { - // if equal to last pick 1, if not then pick 0 - search_direction = (id_bit_number == search->last_discrepancy); - } - - // if 0 was picked then record its position in LastZero - if (!search_direction) { - last_zero = id_bit_number; - } - } - - // set or clear the bit in the ROM byte rom_byte_number - // with mask rom_byte_mask - if (search_direction) { - search->rom_no[rom_byte_number] |= rom_byte_mask; - } else { - search->rom_no[rom_byte_number] &= ~rom_byte_mask; - } - - // serial number search direction write bit - _onewire_write_bit(pin, search_direction); - - // increment the byte counter id_bit_number - // and shift the mask rom_byte_mask - id_bit_number++; - rom_byte_mask <<= 1; - - // if the mask is 0 then go to new SerialNum byte rom_byte_number and reset mask - if (rom_byte_mask == 0) { - rom_byte_number++; - rom_byte_mask = 1; - } - } - } while (rom_byte_number < 8); // loop until through all ROM bytes 0-7 - - // if the search was successful then - if (!(id_bit_number < 65)) { - // search successful so set last_discrepancy,last_device_found,search_result - search->last_discrepancy = last_zero; - - // check for last device - if (search->last_discrepancy == 0) { - search->last_device_found = true; - } - - search_result = 1; - } - } - - // if no device found then reset counters so next 'search' will be like a first - if (!search_result || !search->rom_no[0]) { - search->last_discrepancy = 0; - search->last_device_found = false; - return ONEWIRE_NONE; - } else { - addr = 0; - for (rom_byte_number = 7; rom_byte_number >= 0; rom_byte_number--) { - addr = (addr << 8) | search->rom_no[rom_byte_number]; - } - //printf("Ok I found something at %08x%08x...\n", (uint32_t)(addr >> 32), (uint32_t)addr); - } - return addr; -} - -// The 1-Wire CRC scheme is described in Maxim Application Note 27: -// "Understanding and Using Cyclic Redundancy Checks with Maxim iButton Products" -// - -#if ONEWIRE_CRC8_TABLE -// This table comes from Dallas sample code where it is freely reusable, -// though Copyright (C) 2000 Dallas Semiconductor Corporation -static const uint8_t dscrc_table[] = { - 0, 94,188,226, 97, 63,221,131,194,156,126, 32,163,253, 31, 65, - 157,195, 33,127,252,162, 64, 30, 95, 1,227,189, 62, 96,130,220, - 35,125,159,193, 66, 28,254,160,225,191, 93, 3,128,222, 60, 98, - 190,224, 2, 92,223,129, 99, 61,124, 34,192,158, 29, 67,161,255, - 70, 24,250,164, 39,121,155,197,132,218, 56,102,229,187, 89, 7, - 219,133,103, 57,186,228, 6, 88, 25, 71,165,251,120, 38,196,154, - 101, 59,217,135, 4, 90,184,230,167,249, 27, 69,198,152,122, 36, - 248,166, 68, 26,153,199, 37,123, 58,100,134,216, 91, 5,231,185, - 140,210, 48,110,237,179, 81, 15, 78, 16,242,172, 47,113,147,205, - 17, 79,173,243,112, 46,204,146,211,141,111, 49,178,236, 14, 80, - 175,241, 19, 77,206,144,114, 44,109, 51,209,143, 12, 82,176,238, - 50,108,142,208, 83, 13,239,177,240,174, 76, 18,145,207, 45,115, - 202,148,118, 40,171,245, 23, 73, 8, 86,180,234,105, 55,213,139, - 87, 9,235,181, 54,104,138,212,149,203, 41,119,244,170, 72, 22, - 233,183, 85, 11,136,214, 52,106, 43,117,151,201, 74, 20,246,168, - 116, 42,200,150, 21, 75,169,247,182,232, 10, 84,215,137,107, 53}; - -#ifndef pgm_read_byte -#define pgm_read_byte(addr) (*(const uint8_t *)(addr)) -#endif - -// -// Compute a Dallas Semiconductor 8 bit CRC. These show up in the ROM -// and the registers. (note: this might better be done without to -// table, it would probably be smaller and certainly fast enough -// compared to all those delayMicrosecond() calls. But I got -// confused, so I use this table from the examples.) -// -uint8_t onewire_crc8(const uint8_t *data, uint8_t len) { - uint8_t crc = 0; - - while (len--) { - crc = pgm_read_byte(dscrc_table + (crc ^ *data++)); - } - return crc; -} -#else -// -// Compute a Dallas Semiconductor 8 bit CRC directly. -// this is much slower, but much smaller, than the lookup table. -// -uint8_t onewire_crc8(const uint8_t *data, uint8_t len) { - uint8_t crc = 0; - while (len--) { - uint8_t inbyte = *data++; - for (int i = 8; i; i--) { - uint8_t mix = (crc ^ inbyte) & 0x01; - crc >>= 1; - if (mix) crc ^= 0x8C; - inbyte >>= 1; + return 1; +} + +uint8_t onewire_init(onewire_bus_handle_t *bus, gpio_num_t bus_pin, gpio_config_t *custom_config) +{ + if (!bus) + { + ESP_LOGW(TAG_ONEWIRE, "bus is null! (onewire_init)"); + + return 0; + } + + bus->pin = bus_pin; + bus->mutex = xSemaphoreCreateMutex(); + + // configure GPIO + if(!onewire_configure_gpio(bus_pin, custom_config)) + { + return 0; + } + + return 1; +} + +uint8_t onewire_reset(onewire_bus_handle_t *bus) +{ + uint8_t presence; + + if (xSemaphoreTake(bus->mutex, _BLOCK_TIME)) + { + gpio_set_level(bus->pin, 0); // Send reset pulse + ets_delay_us(_ONEWIRE_RESET_WAIT); + + gpio_set_level(bus->pin, 1); // Leave floating + ets_delay_us(_ONEWIRE_PRESENCE_WAIT); + + presence = !gpio_get_level(bus->pin); + + xSemaphoreGive(bus->mutex); + } + else + { + ESP_LOGE(TAG_ONEWIRE, _SEMFAIL_MSG, "onewire_reset"); + + return -1; + } + + ets_delay_us(_ONEWIRE_RESET_RECOVERY); + + return presence; +} + +void onewire_write_bit(onewire_bus_handle_t *bus, uint8_t bit) +{ + if (xSemaphoreTake(bus->mutex, _BLOCK_TIME)) + { + if (bit) + { + // Write 1 + gpio_set_level(bus->pin, 0); + ets_delay_us(_ONEWIRE_WRITE1_LOW); + + gpio_set_level(bus->pin, 1); + ets_delay_us(_ONEWIRE_WRITE1_WAIT); } + else + { + // Write 0 + gpio_set_level(bus->pin, 0); + ets_delay_us(_ONEWIRE_WRITE0_LOW); + + gpio_set_level(bus->pin, 1); + ets_delay_us(_ONEWIRE_WRITE0_WAIT); + } + + xSemaphoreGive(bus->mutex); } - return crc; -} -#endif - -// Compute the 1-Wire CRC16 and compare it against the received CRC. -// Example usage (reading a DS2408): -// // Put everything in a buffer so we can compute the CRC easily. -// uint8_t buf[13]; -// buf[0] = 0xF0; // Read PIO Registers -// buf[1] = 0x88; // LSB address -// buf[2] = 0x00; // MSB address -// WriteBytes(net, buf, 3); // Write 3 cmd bytes -// ReadBytes(net, buf+3, 10); // Read 6 data bytes, 2 0xFF, 2 CRC16 -// if (!CheckCRC16(buf, 11, &buf[11])) { -// // Handle error. -// } -// -// @param input - Array of bytes to checksum. -// @param len - How many bytes to use. -// @param inverted_crc - The two CRC16 bytes in the received data. -// This should just point into the received data, -// *not* at a 16-bit integer. -// @param crc - The crc starting value (optional) -// @return 1, iff the CRC matches. -bool onewire_check_crc16(const uint8_t* input, size_t len, const uint8_t* inverted_crc, uint16_t crc_iv) { - uint16_t crc = ~onewire_crc16(input, len, crc_iv); - return (crc & 0xFF) == inverted_crc[0] && (crc >> 8) == inverted_crc[1]; -} - -// Compute a Dallas Semiconductor 16 bit CRC. This is required to check -// the integrity of data received from many 1-Wire devices. Note that the -// CRC computed here is *not* what you'll get from the 1-Wire network, -// for two reasons: -// 1) The CRC is transmitted bitwise inverted. -// 2) Depending on the endian-ness of your processor, the binary -// representation of the two-byte return value may have a different -// byte order than the two bytes you get from 1-Wire. -// @param input - Array of bytes to checksum. -// @param len - How many bytes to use. -// @param crc - The crc starting value (optional) -// @return The CRC16, as defined by Dallas Semiconductor. -uint16_t onewire_crc16(const uint8_t* input, size_t len, uint16_t crc_iv) { - uint16_t crc = crc_iv; - static const uint8_t oddparity[16] = - { 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0 }; - - uint16_t i; - for (i = 0; i < len; i++) { - // Even though we're just copying a byte from the input, - // we'll be doing 16-bit computation with it. - uint16_t cdata = input[i]; - cdata = (cdata ^ crc) & 0xff; - crc >>= 8; - - if (oddparity[cdata & 0x0F] ^ oddparity[cdata >> 4]) - crc ^= 0xC001; - - cdata <<= 6; - crc ^= cdata; - cdata <<= 1; - crc ^= cdata; + else + { + ESP_LOGE(TAG_ONEWIRE, _SEMFAIL_MSG, "onewire_write_bit"); } - return crc; } + +uint8_t onewire_read_bit(onewire_bus_handle_t *bus) +{ + uint8_t bit; + + if (xSemaphoreTake(bus->mutex, _BLOCK_TIME)) + { + gpio_set_level(bus->pin, 0); + ets_delay_us(_ONEWIRE_WRITE1_LOW); + + gpio_set_level(bus->pin, 1); + ets_delay_us(_ONEWIRE_READ_WAIT); + + bit = !gpio_get_level(bus->pin); + + xSemaphoreGive(bus->mutex); + + ets_delay_us(_ONEWIRE_READ_RECOVERY); + } + else + { + ESP_LOGE(TAG_ONEWIRE, _SEMFAIL_MSG, "onewire_read_bit"); + + return -1; + } + + return bit; +} + +void onewire_write_byte(onewire_bus_handle_t *bus, uint8_t byte) +{ + uint8_t i; + + for (i = 0; i < 8; i++) + { + onewire_write_bit(bus, (byte >> i) & 0x01); + } +} + +uint8_t onewire_read_byte(onewire_bus_handle_t *bus) +{ + uint8_t i; + uint8_t byte = 0x0; + + for (i = 0; i < 8; i++) + { + byte |= (!onewire_read_bit(bus) << i); + } + + return byte; +} + +void onewire_send_command(onewire_bus_handle_t *bus, onewire_rom_commands_t command) +{ + uint8_t payload = 0x0 ^ command; + + onewire_write_byte(bus, payload); +} \ No newline at end of file diff --git a/embadet/components/onewire/onewire.h b/embadet/components/onewire/onewire.h old mode 100644 new mode 100755 index ddc88dc..f919017 --- a/embadet/components/onewire/onewire.h +++ b/embadet/components/onewire/onewire.h @@ -1,243 +1,121 @@ -#ifndef __ONEWIRE_H__ -#define __ONEWIRE_H__ +#ifndef ONEWIRE_H +#define ONEWIRE_H -#include // sdk_os_delay_us -#include "FreeRTOS.h" +#include "freertos/FreeRTOS.h" +#include "freertos/semphr.h" +#include "driver/gpio.h" +#include "esp_types.h" +#include "esp_err.h" -#ifdef __cplusplus -extern "C" { -#endif +#define _ONEWIRE_WRITE1_LOW 6 +#define _ONEWIRE_WRITE1_WAIT 64 +#define _ONEWIRE_WRITE0_LOW 60 +#define _ONEWIRE_WRITE0_WAIT 10 +#define _ONEWIRE_READ_WAIT 9 +#define _ONEWIRE_READ_RECOVERY 55 +#define _ONEWIRE_RESET_WAIT 480 +#define _ONEWIRE_PRESENCE_WAIT 70 +#define _ONEWIRE_RESET_RECOVERY 410 -/** @file onewire.h - * - * Routines to access devices using the Dallas Semiconductor 1-Wire(tm) - * protocol. - */ +#define _BLOCK_TIME pdMS_TO_TICKS(1000) +#define _SEMFAIL_MSG "Failed to obtain semaphore. (%s)" -/** Select the table-lookup method of computing the 8-bit CRC - * by setting this to 1 during compilation. The lookup table enlarges code - * size by about 250 bytes. By default, a slower but very compact algorithm - * is used. - */ -#ifndef ONEWIRE_CRC8_TABLE -#define ONEWIRE_CRC8_TABLE 0 -#endif +static const char *TAG_ONEWIRE = "ONEWIRE"; -/** Type used to hold all 1-Wire device ROM addresses (64-bit) */ -typedef uint64_t onewire_addr_t; +typedef enum { + _ROM_READ = 0x33, + _ROM_SEARCH = 0xF0, + _ROM_MATCH = 0x55, + _ROM_SKIP = 0xCC +} onewire_rom_commands_t; -/** Structure to contain the current state for onewire_search_next(), etc */ typedef struct { - uint8_t rom_no[8]; - uint8_t last_discrepancy; - bool last_device_found; -} onewire_search_t; + gpio_num_t pin; + SemaphoreHandle_t mutex; +} onewire_bus_handle_t; -/** ::ONEWIRE_NONE is an invalid ROM address that will never occur in a device - * (CRC mismatch), and so can be useful as an indicator for "no-such-device", - * etc. +/** + * @brief Configure gpio pins for onewire communication + * + * Set `custom_config` to NULL for default config. + * + * @param pin Bus pin + * @param custom_config Custom gpio config + * + * @retval 1: Success + * @retval 0: Incorrect pin or gpio configuration failed (Logs tells which happened) */ -#define ONEWIRE_NONE ((onewire_addr_t)(0xffffffffffffffffLL)) +uint8_t onewire_configure_gpio(gpio_num_t pin, gpio_config_t *custom_config); -/** Perform a 1-Wire reset cycle. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * - * @returns `true` if at least one device responds with a presence pulse, - * `false` if no devices were detected (or the bus is shorted, etc) +/** + * @brief Initalize onewire bus + * + * Set `custom_config` to NULL for default config. + * @warning MUST be called before any other library function! + * + * @param bus Bus handle + * @param pin Bus pin + * @param custom_config Custom gpio config + * + * @retval 1: Success + * @retval 0: `bus` is NULL or gpio configuration failed (Logs tells which happened) */ -bool onewire_reset(int pin); +uint8_t onewire_init(onewire_bus_handle_t *bus, gpio_num_t bus_pin, gpio_config_t *custom_config); -/** Issue a 1-Wire rom select command to select a particular device. - * - * It is necessary to call onewire_reset() before calling this function. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * @param addr The ROM address of the device to select - * - * @returns `true` if the "ROM select" command could be succesfully issued, - * `false` if there was an error. +/** + * @brief Send reset pulse + * + * @param bus Bus handle + * + * @retval 1: Success (device sent presence pulse) + * @retval -1: Failed to obtain semaphore for gpio handling + * @retval 0: Device failed to return presence pulse */ -bool onewire_select(int pin, const onewire_addr_t addr); +uint8_t onewire_reset(onewire_bus_handle_t *bus); -/** Issue a 1-Wire "skip ROM" command to select *all* devices on the bus. - * - * It is necessary to call onewire_reset() before calling this function. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * - * @returns `true` if the "skip ROM" command could be succesfully issued, - * `false` if there was an error. +/** + * @brief Write bit + * + * @param bus Bus handle + * @param bit Bit to send */ -bool onewire_skip_rom(int pin); +void onewire_write_bit(onewire_bus_handle_t *bus, uint8_t bit); -/** Write a byte on the onewire bus. - * - * The writing code uses open-drain mode and expects the pullup resistor to - * pull the line high when not driven low. If you need strong power after the - * write (e.g. DS18B20 in parasite power mode) then call onewire_power() after - * this is complete to actively drive the line high. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * @param v The byte value to write - * - * @returns `true` if successful, `false` on error. +/** + * @brief Write byte + * + * @param bus Bus handle + * @param bit Byte to send */ -bool onewire_write(int pin, uint8_t v); +void onewire_write_byte(onewire_bus_handle_t *bus, uint8_t byte); -/** Write multiple bytes on the 1-Wire bus. - * - * See onewire_write() for more info. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * @param buf A pointer to the buffer of bytes to be written - * @param count Number of bytes to write - * - * @returns `true` if all bytes written successfully, `false` on error. +/** + * @brief Read bit + * + * @param bus Bus handle + * + * @retval 1: Device returned 1 + * @retval 0: Device returned 0 + * @retval -1: Failed to obtain semaphore for gpio handling */ -bool onewire_write_bytes(int pin, const uint8_t *buf, size_t count); +uint8_t onewire_read_bit(onewire_bus_handle_t *bus); -/** Read a byte from a 1-Wire device. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * - * @returns the read byte on success, negative value on error. +/** + * @brief Read bit + * + * @param bus Bus handle + * + * @return Byte returned by device */ -int onewire_read(int pin); +uint8_t onewire_read_byte(onewire_bus_handle_t *bus); -/** Read multiple bytes from a 1-Wire device. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * @param buf A pointer to the buffer to contain the read bytes - * @param count Number of bytes to read - * - * @returns `true` on success, `false` on error. +/** + * @brief Send command to device + * + * @param bus Bus handle + * @param command Onewire rom command + * */ -bool onewire_read_bytes(int pin, uint8_t *buf, size_t count); +void onewire_send_command(onewire_bus_handle_t *bus, onewire_rom_commands_t command); -/** Actively drive the bus high to provide extra power for certain operations - * of parasitically-powered devices. - * - * For parasitically-powered devices which need more power than can be - * provided via the normal pull-up resistor, it may be necessary for some - * operations to drive the bus actively high. This function can be used to - * perform that operation. - * - * The bus can be depowered once it is no longer needed by calling - * onewire_depower(), or it will be depowered automatically the next time - * onewire_reset() is called to start another command. - * - * Note: Make sure the device(s) you are powering will not pull more current - * than the ESP8266 is able to supply via its GPIO pins (this is especially - * important when multiple devices are on the same bus and they are all - * performing a power-intensive operation at the same time (i.e. multiple - * DS18B20 sensors, which have all been given a "convert T" operation by using - * onewire_skip_rom())). - * - * Note: This routine will check to make sure that the bus is already high - * before driving it, to make sure it doesn't attempt to drive it high while - * something else is pulling it low (which could cause a reset or damage the - * ESP8266). - * - * @param pin The GPIO pin connected to the 1-Wire bus. - * - * @returns `true` on success, `false` on error. - */ -bool onewire_power(int pin); - -/** Stop forcing power onto the bus. - * - * You only need to do this if you previously called onewire_power() to drive - * the bus high and now want to allow it to float instead. Note that - * onewire_reset() will also automatically depower the bus first, so you do - * not need to call this first if you just want to start a new operation. - * - * @param pin The GPIO pin connected to the 1-Wire bus. - */ -void onewire_depower(int pin); - -/** Clear the search state so that it will start from the beginning on the next - * call to onewire_search_next(). - * - * @param search The onewire_search_t structure to reset. - */ -void onewire_search_start(onewire_search_t *search); - -/** Setup the search to search for devices with the specified "family code". - * - * @param search The onewire_search_t structure to update. - * @param family_code The "family code" to search for. - */ -void onewire_search_prefix(onewire_search_t *search, uint8_t family_code); - -/** Search for the next device on the bus. - * - * The order of returned device addresses is deterministic. You will always - * get the same devices in the same order. - * - * @returns the address of the next device on the bus, or ::ONEWIRE_NONE if - * there is no next address. ::ONEWIRE_NONE might also mean that the bus is - * shorted, there are no devices, or you have already retrieved all of them. - * - * It might be a good idea to check the CRC to make sure you didn't get - * garbage. - */ -onewire_addr_t onewire_search_next(onewire_search_t *search, int pin); - -/** Compute a Dallas Semiconductor 8 bit CRC. - * - * These are used in the ROM address and scratchpad registers to verify the - * transmitted data is correct. - */ -uint8_t onewire_crc8(const uint8_t *data, uint8_t len); - -/** Compute the 1-Wire CRC16 and compare it against the received CRC. - * - * Example usage (reading a DS2408): - * @code - * // Put everything in a buffer so we can compute the CRC easily. - * uint8_t buf[13]; - * buf[0] = 0xF0; // Read PIO Registers - * buf[1] = 0x88; // LSB address - * buf[2] = 0x00; // MSB address - * onewire_write_bytes(pin, buf, 3); // Write 3 cmd bytes - * onewire_read_bytes(pin, buf+3, 10); // Read 6 data bytes, 2 0xFF, 2 CRC16 - * if (!onewire_check_crc16(buf, 11, &buf[11])) { - * // TODO: Handle error. - * } - * @endcode - * - * @param input Array of bytes to checksum. - * @param len Number of bytes in `input` - * @param inverted_crc The two CRC16 bytes in the received data. - * This should just point into the received data, - * *not* at a 16-bit integer. - * @param crc_iv The crc starting value (optional) - * - * @returns `true` if the CRC matches, `false` otherwise. - */ -bool onewire_check_crc16(const uint8_t* input, size_t len, const uint8_t* inverted_crc, uint16_t crc_iv); - -/** Compute a Dallas Semiconductor 16 bit CRC. - * - * This is required to check the integrity of data received from many 1-Wire - * devices. Note that the CRC computed here is *not* what you'll get from the - * 1-Wire network, for two reasons: - * 1. The CRC is transmitted bitwise inverted. - * 2. Depending on the endian-ness of your processor, the binary - * representation of the two-byte return value may have a different - * byte order than the two bytes you get from 1-Wire. - * - * @param input Array of bytes to checksum. - * @param len How many bytes are in `input`. - * @param crc_iv The crc starting value (optional) - * - * @returns the CRC16, as defined by Dallas Semiconductor. - */ -uint16_t onewire_crc16(const uint8_t* input, size_t len, uint16_t crc_iv); - -#ifdef __cplusplus -} -#endif - -#endif /* __ONEWIRE_H__ */ +#endif \ No newline at end of file diff --git a/embadet/main/apple.c b/embadet/main/apple.c index 98db675..93411e7 100644 --- a/embadet/main/apple.c +++ b/embadet/main/apple.c @@ -1,45 +1,45 @@ - +#include "esp_log.h" #include #include #include #include // Die Header-Datei mit DS18B20-Funktionen +#include -#define GPIO_PIN 4 // GPIO Pin, an den der DS18B20 angeschlossen ist -#define INTERVAL 100 // Intervall in Sekunden +int app_main() { + // Create variable for handler + ds18b20_handler_t sensor; -void delay(int seconds) { - time_t start_time = time(NULL); - while (time(NULL) - start_time < seconds); -} + // Check for any initialization failures + if (!ds18b20_init(&sensor, GPIO_NUM_2, TEMP_RES_12_BIT)) + { + ESP_LOGE("TAG", "Failed to initalize DS18B20!"); -int main() { - ds18b20_addr_t sensor_address; + return 0; // Exit + } - // Sensoren auf dem Bus scannen (angenommen, dass nur ein Sensor angeschlossen ist) - int sensor_count = ds18b20_scan_devices(GPIO_PIN, &sensor_address, 1); - if (sensor_count <= 0) { - printf("Kein DS18B20-Sensor gefunden!\n"); - return -1; - } + float temp = 0; - while (1) { - // Temperaturmessung starten - bool success = ds18b20_measure(GPIO_PIN, sensor_address, true); - if (!success) { - printf("Fehler bei der Temperaturmessung\n"); - } else { - // Temperaturwert lesen - float temperature = ds18b20_read_temperature(GPIO_PIN, sensor_address); - if (temperature != temperature) { // NaN-Check - printf("Fehler beim Lesen der Temperatur\n"); - } else { - printf("Aktuelle Temperatur: %.2f°C\n", temperature); - } - } - // Wartezeit von 100 Sekunden - delay(INTERVAL); - } + + // If you doesn't convert temperature you may read 85.0 Celsius, + // as it is default temperature set by DS18B20 if convert command wasn't issued. + + // Read temperature + printf("hit"); + for(int i = 0; i < 30; ++i) { + // Initalize conversion + ds18b20_convert_temp(&sensor); + temp = ds18b20_read_temp(&sensor); + vTaskDelay(5000 / portTICK_PERIOD_MS); + printf("\n"); + printf( "Temperature = %.4f", temp); + }; + + // Print temperature with 4 decimal places + // (12 bit resolution measurement accuracy is 0.0625 Celsius) + ESP_LOGI("TAG", "Temperature = %.4f", temp); + + return 0; }