hackathon/BoskoopBase
4
0
Fork 0
Code Issues 25 Pull requests Projects 2 Releases Packages Wiki Activity Actions

correckt spelleing mistake

Browse source
This commit is contained in:
user 2024-10-13 16:39:56 +02:00
parent 551f12c939
commit 28826246f3
1 changed files with 15 additions and 16 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

29
embadet/readme.md
View file

@ -1,24 +1,23 @@
# Info # Info
## Important comands ## Important Commands
Comand for build options of the projeckt\ Command to configure build options of the project:
`make menuconfig` `make menuconfig`
Comand for flashing\ Command to flash the firmware:
`make flash` `make flash`
Comand for showing the serial monitor\ Command to show the serial monitor:
`make monitor` `make monitor`
## Connection error ## Connection Error
If you get the error [Errno 2] you propiply dident conneckt the microcontrorloer or hav the wrong tty selectet. If you encounter the error `[Errno 2]`, it likely means the microcontroller is not connected or the wrong tty port is selected.
to select the right tty use comand `make menuconfig` and then go to **serial flasher config -> Default serial port** To select the correct tty port, use the command `make menuconfig`, then navigate to **Serial Flasher Config -> Default Serial Port** and choose the correct port.
then change to the right port
## Sensor isshus ## Sensor Issues
if the out put of the sensor is atound **80°** you have a power conection ishue. \ If the sensor output is around **80°C**, there is likely a power connection issue.
if you got the output around **-127°** sense wire not conectet. If the output is around **-127°C**, the sensor's data wire is probably not connected.
## Compiling errors ## Compilation Errors
when the temp input is non it mid be a compyling error caude by a falty sdk configuration \ If the temperature input is `none`, it might be due to a compilation error caused by an incorrect SDK configuration.
so use the command ```make menuconfig``` to chaing the following settings \ Use the command `make menuconfig` and change the following settings:
**Component config -> newlib -> disable nano formatting** **Component config -> newlib -> Disable nano formatting**