From 5d87466639acea71c5210cb86457c870cc3625d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Baran=20Sch=C3=B6neberg?= Date: Thu, 26 Jun 2025 01:18:56 +0200 Subject: [PATCH] Glossary aktualisiert --- Glossary.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Glossary.md b/Glossary.md index 86e6e23..a4fdbcc 100644 --- a/Glossary.md +++ b/Glossary.md @@ -1,3 +1,7 @@ +IPv6 Address: An IPv6 address is a 128-bit identifier used to uniquely identify a device on an IPv6 network, written in hexadecimal and separated by colons (e.g., 2001:db8::1). + +VLAN(Virtual Local Area Network): A VLAN is a logical subdivision of a physical network that groups devices together based on function or department, allowing them to communicate as if they were on the same physical network, even if they are not. + Unique Local Unicast Adressen: Private IPv6 addresses used for communication within a single organization or site. They are not routable on the global internet. Prefix: fd00::/8. Global Unicast Adressen: Public IPv6 addresses that are globally routable on the internet. They are assigned by IANA/ISPs and are used for direct communication across networks. Prefix example: 2000::/3. @@ -10,6 +14,8 @@ ACL(Access Control List): A set of rules used to control network traffic and res DHCPv6(Dynamic Host Configuration Protocol for IPv6): A protocol that automatically assigns IPv6 addresses and configuration settings to devices on a network. +Stateful DHCPv6: A method where a DHCPv6 server centrally assigns and manages IPv6 addresses and additional configuration information (like DNS), similar to DHCP in IPv4. + SLAAC(Stateless Address Autoconfiguration): SLAAC is an IPv6 feature that allows devices to automatically generate their own IP address using router advertisements, without needing a DHCP server. -OSPFv3(Open Shortest Path First version 3): A routing protocol used in IPv6 networks to find the best path for data between routers. +OSPFv3(Open Shortest Path First version 3): A routing protocol used in IPv6 networks to find the best path for data between routers. \ No newline at end of file